Wednesday, March 25, 2015

Marine Raiders


I picked up a couple of packs of Brigade Games WW2 USMC raiders from North Star Figures some time ago when they were blowing them out. I figured I can always make use of special forces types – if not in a more conventional war game, surely in some smaller scale skirmish or role-playing game (possibly involving over-the-top pulp adventure or otherworldly baddies). I’d need a few more riflemen to make a smallish force to take on my Japanese.

(Remember: click on the pictures for a bigger version):


Marine raiders from Brigade Games.

I suppose if I had six more riflemen I could do a small force with a small head quarters of two, and three squads of 6 men… but for now this force is as complete as I need it to be and I have no desire to go tracking down more marines for it at present…


Headquarters – Lieutenant and Sergeant


First team



Second team


Third team

Actually now that I think about it, it may have been two packs of 4 marine raiders and a pack of 6 marines with BARs and Rifles...?


Coming soon on Tim’s Miniature Wargaming Blog:

Japanese...? Probably...? Or maybe French...

Saturday, March 21, 2015

Chindits


After cranking out all those Japanese I thought I’d best get started on some opposing forces before I did any more. (Also I was waiting for a few more Japanese and French before I finished off those forces – which arrived yesterday afternoon).

This is pretty much all the Chindits I have at the moment – I do still have a second Vickers team (not sure how I ended up with that!?), a chap leading a mule, and a couple of Burmese scouts. I guess it isn’t much of a “force” – at least not for Bolt Action.

I think I bought a starter box and the two Vickers teams a couple years back…? I’ll likely pick up another ten-man section – which will give me about 21 riflemen - which I could split up into a platoon of three sections of seven… THAT will be a bit more of a force to reckon with! 

(Remember: click on the pictures for a bigger version):


The force so far (all the figures are from Bolt Action Miniatures/Warlord Games)


A small command element


Medic with wounded


Rifle section


Vickers MG team


2” Mortar team

If some of the pictures above look like there's snow on the bases and the game board I use as a backdrop... that's because it was SNOWING this afternoon!?



March started out with -40°C weather... within a week it was above freezing and almost all of the snow melted... now, on the first day of spring, it's snowing again... ugh.. enough already! 


Coming soon on Tim’s Miniature Wargaming Blog:

An early war French infantry platoon or STILL MORE Japanese infantry – a whole SECOND (understrength) platoon! 

Thursday, March 19, 2015

MORE WW2 Japanese Infantry


On a bit of a tear here – got my eyes on the prize and not slowing down (the prize, of course, being FINISHED FORCES! HUZZAH!)

Well, maybe not really “finished” – there’s always SOMETHING I could add… More of a “finished what I have – complete, useable forces to which small additional options could be added – mostly the occasional supporting tank or some such.

(Remember: click on the pictures for a bigger version):


Another Batch of Battle Honors Japanese. With a slight re-org and an order of another section I should end up with two platoons of three sections with about 8 men per section – one platoon being (mostly) Battle Honors, and the other platoon being mostly Warlord Games.

Here’s what the whole platoon looks like so far…


These are currently organized as two rifle squads and a grenadier squad (with THREE light mortar teams!). These could be organized as later war infantry sections – each with their own light mortar team – but one section would be short an LMG team. I could order a single LMG team from Warlord Games - and probably will in the not-too-distant future (as I also need a similar team for the French to finish out that platoon…).


Officer


Rifle section #1


Rifle Section #2


Grenadier Section


Supporting Medium Mortar team (and spotter)


Coming soon on Tim’s Miniature Wargaming Blog:

The Opposing Force: Chindits! 

Wednesday, March 18, 2015

French and Japanese Support

A few more WW2 items rolling off the workbench; French and Japanese SNLF support weapons!

(Remember: click on the pictures for a bigger version):


Some mortar support for my small platoon of the Japanese Special Naval Landing Force.



Figures are from Battle Honors (and are considerably smaller than the rest of the SNLF miniatures, but I figured the mortar would be deployed far enough away from any of the Infantry Sections that the difference wouldn’t be so noticeable…)


French support weapons (all from Warlord Games/Bolt Action Miniatures)


The trusty old French 75. 



State of the art in 1914, in 1939… not so much… but according to the Bolt Action rules, it seems the French get a free one with any force…!?


French Medium Mortar team



French Medium Mortar team


French MMG team



French MMG team

Coming soon on Tim’s Miniature Wargaming Blog:

More Japanese infantry.

Probably. 

Sunday, March 15, 2015

WW2 Japanese


 seem to be on a bit of a WW2 painting rampage. It’s largely due to the fact that it’s a bunch of small collections of different things that are closer to being finished than not (and it’s fun to be able to finish things up).

My antipathy towards playing WW2 games must be diminishing somewhat. While I wouldn’t go so far as to say I am “stoked” to play with these – I at least no longer feel a strong desire to cause grievous self-harm at the thought of playing WW2 miniature wargames.

The other day I took some pictures of some previously painted Japanese (Special Naval Landing Force) and added them to the 28mm World War Two Gallery. Last night I decided to work on a few more Japanese (and some French… but that’s for another day).

I threw The Thin Red Line on the DVD player while I was finishing up this batch last night. What a thoroughly depressing movie… I really like the movie, though. Three are some really great performances. And I love that Elias Koteas plays a character that isn’t a total psycho-nutjob (like he does in pretty much EVERY OTHER MOVIE I’VE SEEN HIM IN!?) and he totally nails it.

(Remember: click on the pictures for a bigger version):


Two (understrength) squads for an Imperial Japanese Army platoon. The figures are all from Battle Honors.

For Bolt Action these could be two squads of seven Regulars with an LMG at 90 points each. Given the equipment I have available to paint for the IJA I will probably be fielding two undrestrength platoons – each with two regular infantry squads (as these above) and a Grenadier (or Mortar) Squad with six troopers and three Light Mortars!


Two suicidal Anti-Tank troopers – also from Battle Honors. (20 points each for regulars in Bolt Action). At the moment these are kind of useless as none of the opposing forces I have for the Japanese (US Marines, Chindits and some Aussies)  have any armoured support that these guys could blow themselves up on… Ah well…


Imperial Japanese Army casualties from West Wind Productions


Japanese Special Naval Landing Force casualties also from West Wind Productions


As I’ve been organizing these WW2 miniatures to paint I’ve discovered a few small deficiencies in a couple of the forces (mostly the Japanese and French) and so I thought I’d try and place a small order with J&M Miniatures - a webstore run out of Stratford, Ontario, Canada and operated in part by a fellow whose blog I’ve been following for a while (Rabbits in my Basement).


Coming soon on Tim’s Miniature Wargaming Blog:

More WW2 miniature painting I suppose… Possible some French…? Or more Japanese…? 

Tuesday, March 10, 2015

First Special Service Forcemen and Droogies


A few more odd and sundry items rolling off the workbench.

(Remember: click on the pictures for a bigger version):


These are some support weapons I converted for my First Special Service Force platoon. The figures were American paratroopers from Artizan Designs - so they were a pretty good match for the First Special Service Force figures (which are also from Artizan). I do hope Artizan will produce a pack of troopers with the Johnson LMG (which Nick at North Star Figures had indicated were in the works) at which point I will pick up those and a few more packs for riflemen and some of the other “character” packs and finish up the platoon. I converted these as I have a feeling that, considering how long it’s taken to get that last pack of Johnson gunners out, they will likely never get around to producing aupport elements such as these.


The .30 Cal MG team


Another shot of the .30 Cal MG team so you can see some of the conversion work – mostly I tried to modify the jackets to look more like the FSSF parkas and rounded the edges of the pant cargo pockets to look more like the Mountain Trousers of the FSSF than the Jump trousers of the paratroopers.


60mm Mortar team I left a few in the Jump Jackets – as some members of the force seem to have been issued with them - (mostly on the ones where carving off the pockets would be problematic) and gave them the force shoulder patch.


Bazooka Team #1 in Parkas


Pazooka Team #2 in Jump Jackets and Mountain Trousers.


Alex, Pete, Georgie, and Dim heading on over to the Korova Milkbar where they will try  to make up their rassoodocks what to do with the evening. Figures from Crooked Dice.

I have no idea when or where I shall use these... Like so many of my miniature purchases - it just seemed like a good idea at the time. 


Coming soon on Tim’s Miniature Wargaming Blog:

um...?

Sunday, March 8, 2015

WW2 Odd and Extra Bits


We finished up Game of Thrones Season Four last night, but I actually ended up WATCHING the last two episodes, so I didn’t get much painting done…

I think I’ll listen to some of the commentaries over the next few evenings before I have to return it to the library. I always get lots of painting done while listening to commentaries.

In the meantime…

(Remember: click on the pictures for a bigger version):


Commando Command Team which I could use as an alternate Troop Command for my Commando Troop or, more likely, I will use them as Forward observers for directing naval gunfire at targets inland.

The figures are from Artizan Designs

 
A German Signaller and Medic. Figures from Warlord Games


A highlander armed with a Thompson SMG. The figure is from The figures are from Artizan Designs Thrilling Tales range.


Coming soon on Tim’s Miniature Wargaming Blog:

I recently picked up some Artizan Designs US Paratrooper Support weaons (Mortar, .30 Cal. MGs, Bazookas) that I’ve been trying to convert to look like members of the First Special Service Force – even if they DO release the Johnson LMG packs I need to finish the force, I highly doubt they’ll ever make support weapons for their small “Devil’s Brigade” range.

Friday, March 6, 2015

Canadian (or British) Paratroopers for Bolt Action


Earlier this week I finished up my British/Canadian Paratroopers for WW2 and I finally updated the 28mm World War Two Gallery with pictures of the complete force (so far…). And so hot on the heels of a post about how I’d organize my Commandos for Bolt Action, I thought I’d do the same and organize my Paras for Bolt Action!

THE PLAN for these was originally to just put together a single platoon of Paratroopers that could be passed off as members of either 1st Canadian Parachute Battalion (for D-Day or Varsity or the Race to Wismar) or any British Parachute battalion for WW2. Some how I just kind of ended up with TWO platoons… long story… it’s in the 28mm World War Two Gallery is you care to read it…


The entire force (so far…) – 1762 points (if I took EVERYTHING)

1st Platoon


Platoon HQ:
Platoon Commander (subaltern), Platoon Sergeant, Batman/Runner/Signaller
(Veteran First Lieutenant and two other veterans) 116 points

3x Para Section, each with:
Sergeant and Corporal (both with Stens), a Bren-gunner and seven Riflemen (including Bren #2 – all with SMLE Rifles)


First section
(Paratroop Section – 10 Veterans, 2 Sten SMGs, 1 Bren LMG) 166 points


Second Section
(Paratroop Section – 10 Veterans, 2 Sten SMGs, 1 Bren LMG) 166 points



Third Section
(Paratroop Section – 10 Veterans, 2 Sten SMGs, 1 Bren LMG) 166 points



2nd  Platoon


Platoon HQ:  Platoon Commander (subaltern), Platoon Sergeant, Batman/Runner/Signaller
(Veteran Second Lieutenant and two other veterans) 91 points


3x Para Section, each with:
Sergeant and Corporal (both with Stens), a Bren-gunner and seven Riflemen (including Bren #2 – all with SMLE Rifles)


First section
(Paratroop Section – 10 Veterans, 2 Sten SMGs, 1 Bren LMG) 166 points



Second Section
(Paratroop Section – 10 Veterans, 2 Sten SMGs, 1 Bren LMG) 166 points



Third Section
(Paratroop Section – 10 Veterans, 2 Sten SMGs, 1 Bren LMG) 166 points


Apparently instead of having a light mortar and PIAT in the platoon HQ each Platoon had several 'reserve weapons' allocated to it, namely a Bren gun and a PIAT (and Stens!) (and 2” mortar?) – so some “riflemen” may be issued these to be carried instead or in addition to their SMLE or Sten. Instead of sneaking these into platoon support weapons into specific squads I’ve kept them as separate entities (as in most games they’d be treated as separate teams anyway)


PIAT Teams
(Veteran PIAT Team) 52points each
Of course as these are technically members of the regular platoons, so I could either assume the platoons are overstrength (for that first drop in a major operation) and just add these on OR reduce the number of men in a section for each team by two (-28 points per section/team – for a net addition of +24 points per PIAT team)


2” Mortar Teams
(Veteran Light Mortar Team) 46 points each
As with the PIATs these would replace members of the platoons – in fact, as I have no second members of these mortar teams I would HAVE to steal at least one of the figures from each platoon to field these (for a net +32 points per team – or a net +18 points per team if I were to remove two members of the regular para section to field these).


Snipers – I think these too would be part of the regular platoons
(Veteran Sniper Team) 65 points
As with the PIATs and light mortars above these would replace members of the platoons and – just like the mortar teams - I have no spotters for these sniper teams so I would HAVE to steal at least one of the figures from each platoon to field these (for a net +51 points per team – or a net +37 points per team if I were to remove two members of the regular para section to field these).


Other Supporting Elements Attached Company/Battalion/Divisional Assets:


3” mortars
(Veteran Medium Mortar Team) +65 points each
Technically, I can only field one mortar per platoon – so if I field the light mortars with the platoons they can’t be supported by these…?


Vickers team
(Veteran Machine-Gun Team) +65 points


6 Pounder Anti-Tank Gun
(Veteran QF 6PDR) +90 points


Medical Orderly
(Veteran Medic) +30 points


Flamethrowers
(Veteran Flamethrower Team) +65 points
These should be in teams of two – each team having one guy with the flamethrower and an assistant with a rifle or Sten. So again with the stealing and modifying... 



STILL TO DO:

I’m pretty much done with these…

Perhaps SOMEDAY it might be nice to pick up a few other things:

A medical orderly or stretcher bearer to aid the exsisting medic
(+2 veterans) +26 points

A  Company Command Team
(Veteran Major plus two other Veterans) +191 points

Maybe a jeep or two or three (one to tow the AT gun, one for the company commander and a recce jeep)…? Forward Observers…? but don’t hold your breath…



Coming soon on Tim’s Miniature Wargaming Blog:

This had been fun (in an OCD exercise sort of way)…Should I count up the points and permutations for the Soviets…?

I picked up some American Para support units that I am converting to use as First Special Service Force members… and have a pile of other stuff on the workbench.